Hangzhou Fuda Dehumidification Equipment Co., Ltd.
Hangzhou Fuda Dehumidification Equipment Co., Ltd. ----Customized Solutions for your Air Temperature&Humidity
Add to Cart
Newly Designed Automatic Temperature and Humidity Control Industrial Desiccant Dehumidifier RH≤20%
Quick Details:
Dehumidifying Mode: Cooling combined with Wheel
Desiccant Rotor: Import
Desiccant Material: Silica Gel Wheel
Rated Process Airflow: 6000m³ /h
Supply Air Parameters: T≤20℃, RH≤20%
Dehumidification Efficiency: High
Installed Power: 49.1kw
Voltage: 380V, 3 phase, 50Hz or customized
Certification: ISO9001:2015
Features: Economical, energy-saving
Usage: Air temperature and humidity control
General Description:
Industrial Desiccant Wheel Dehumidifier removes humidity using both cooling coil and a desiccant wheel, so it can both control the humidity and temperature of the air independently in one package unit.
Operating Principles:
Supply Air Stream
Outside air is drawn into the unit using the supply fan. The warm, moist outside air first passes through filters and then the cooling coil where it is cooled. The air then goes through the desiccant wheel where the air is dehumidified and the temperature is raised. At last the air is delivered directly to the space or into an existing air handler.
Exhaust Air Stream
Exhaust air is used to provide energy recovery for the desiccant wheel and is drawn into the unit using the exhaust fan. The air filtered and then heated and humidified during the energy recovery process. The air is then heated while passing through the regeneration coil. The heated air removes the moisture that the desiccant wheel adsorbs from the process air stream.
Applications:
Specifications:
| Model | ZCB-6000 |
| Total Process Airflow (m3/h) | 6000 |
| Required Room Condition | T≤20℃, RH≤20% |
| Fresh Airflow (m3/h) | 600 |
| First Recirculated Airflow (m3/h) | 5400 |
| Rotor Process Airflow (m3/h) | 6000 |
| Rotor Reactivation Airflow (m3/h) | 2000 |
| Supply Air Parameters | T=15℃, RH≤20% |
| Reactivation Temperature | 120±10℃ |
| Reactivation Heating Power (kw) | 42 |
| Reactivation Fan Power (kw) | 1.5 |
| Blower Power (kw) | 5.5 |
| Driving Motor Power (kw) | 0.1 |
| Cooling Load (kw) | 74.1 |
| Chilled Water Consumption(T/h) | 12.7 |
| Powder Supply | 380V/3P/50Hz |
| Installed Power (kw) | 49.1 |
| EPS(Pa) | ≥750 |
Competitive Advantage:
We can provide technical design and suitable dehumidifier according to your requirements.
